Configuring Outlook Express

To configure a new Outlook Express account, follow the instructions below.

1. Launch Outlook Express
2. Click Tools --> Accounts. The Internet Accounts window appears.
3. Click the Mail tab, the Mail Accounts window appears.
In the large window where the mail accounts appear, click on the name of the account, then click the Properties button, the account properties window appears

4. Click the Servers tab. The Servers dialog appears.
From the Servers dialog:
Be sure that My incoming mail server is a is set to your domain name.
The Incoming mail (POP3) server field should read your domain name (e.g. selinet.net).
The Outgoing mail (SMTP) server field should read your domain name.
Make sure your complete Email address (username@domain.com or .net ...) is entered in the Account Name field
re-enter your email account password (which is cAsE sEnSiTiVe). When entered, the password is displayed as a series of asterisks (****), and you can set Outlook Express to remember your password if you don't want to type it in every time you check for new messages)
Ensure the Log On Using Secure Password Authentication box is not checked.
Check the box beside My server requires authentication, then click the Settings button. The Outgoing Mail Server window appears

5. Select Use same settings as my incoming mail server and click OK. The account properties window re-appears.

6. Click Apply, then OK to close the properties window. The Internet Accounts window will reappear.

Configuring Outlook XP

1. Launch Outlook XP
2. Select Tools -> Email Accounts
3. Select Add a new e-mail account
4. Click Next
5. Select POP3 as the Server Type
6. Click Next. The E-mail accounts window appears.
7. From the E-mail accounts window:
 a) Type your full name beside Your Name
 b) Type your full new Email address beside E-mail Address (ex. username@domain.com or .net ...)
 c) Type your full new Email address beside User Name (ex. username@doamin.com or .net ...)
 d) Type your account password in the Password field. The new Email account password can be found on   your Transition Guide surface mailing. The password is also the last 8 digits of your account number. When entered, the password is displayed as a series of asterisks (****), check the box if you want your password to be saved.
 e) Type your domain name as your Incoming mail server (pop3)
 f) Type your domain name as your Outgoing mail server (smtp)

8. Click the More Settings button
9. Click the Outgoing Server tab
10. Check the box beside My outgoing server (SMTP) requires authentication
11. Select Use same settings as my incoming mail server and click OK
12. Click Next. A confirmation window appears
13. Click Finish
14. Select Tools -> Email Accounts
15. Select View or change existing e-mail accounts
16. Click Next
17 From the E-Mail Accounts window, click on your newly created @domain.com or .net ... Email account, the account will highlight.
With your new @domain.com or .net ... Email address selected, click on Set As Default. Your @domain.com Email address is now your default mail account.
18. Click OK to exit the Internet Accounts window, your Email conversion is complete.

Note: To add additional accounts, repeat 2-18.

Configuring Outlook 2000

1. Launch Outlook 2000
2. Click Tools then Accounts
Note: If you selected the "Corporate or Workgroup" option rather than "Internet Only" while installing Outlook, you will see "Services" rather than "Accounts" under the Tools menu.

3. Click Add then Mail
4. Type your full name in the Display name field then click Next. This is the name that will appear in the From: field when you send Email to others
5. Type your Email address in the Email address field, then click Next
6. Select POP3 as the incoming mail server type

7. Input your domain name into the incoming mail server field.
8. Input your domain name into the outgoing mail server field. Then click next.
9. Type your full Email address (username@domain.com) in the Account Name field
10. Enter your email account password (which is cAsE sEnSiTiVe). When entered, the password is displayed as a series of asterisks (****), check the box if you want your password to be saved.
11. Ensure that the Secure Password Authentication box is UNCHECKED, and click Next
12. Click to select Connect using my local area network (LAN), then click Next
13. Click Finish
14. Click Close to close the Internet Accounts window
15. Click Tools --> Accounts
16. Click the account you just created, then click the Properties button
17. Click the Servers tab
18. Check the box beside My server requires authentication, then click the Settings button
19. Select Use same settings as my incoming mail server and click OK
20. Click Apply, then OK to close the properties window. The Internet Accounts window will reappear.
21. From the Internet Accounts window, click on your newly created @domain.com Email account, the account will highlight.
With your new @domain.com Email address selected. click on Set As Default. Your @domain.com Email address is now your default mail account.
22. Click OK to exit the Internet Accounts window, your Email conversion is complete.

Note: To add additional accounts, repeat 2-22.
 

Configuring Netscape 6

1. Start your User Profile Manager by double clicking its icon in the Netscape : Utilities folder on a Mac, or by clicking Start then Programs then Netscape Communicator then Utilities then User Profile Manager in Windows.

2. The Profile Manager dialog box will appear. Select Create Profile, then click Next
Type a name for your new profile. Ensure that this profile name is different from your current profile name.
Note: If you don't provide a different name for your new profile, your account information including bookmarks, email messages and your address book will be overwritten.

3.Click Finish, The Select User Profile window appears
4. Select your new profile, then click Start Netscape 6
5. Click the envelope icon on Netscape's status bar, the Account Wizard appears
6. Select ISP or email provider in the New Account Setup window, then click Next
7. Type your full name in the in the Your Name field, and your new @domain.com address in the Email Address window, then click Next
9. Leave POP3 selected as the incoming server type.
10. Set Incoming mail server to  your domain name

11. Set Outgoing mail (SMTP) server to your domain name then click Next
12. Type your username with the full domain (i.e. username@domain.com) in the User Name field and click Next
13. Type a "friendly name" (i.e. "John's Email") for your new account and click Next
14. Select Finish

Note: To add additional accounts, repeat 1-14.

Configuring Eudora

1. Launch Eudora
2. Right click on your current personality and select New. The New Account Wizard launches
3. Select Create a brand new email account, then click Next
4. Type a name for your new personality in the Personality Name: field then select Next. This is the name that will appear in the Personality list
5. In the Your Name: field, type the name that you would like to appear in the From: field of any Email messages that you send, then click Next
6. Type your Email address in the Email Address: field, then click Next
7. Type your complete Email address (username@domain.com) into the Login Name: field then click Next
8. Set your incoming mail server to your domain name
9. Ensure that pop is selected as the server type, then click Next
10. Set Outgoing mail (SMTP) server to your domain name and click Next
11. Right click on your new personality and click Properties from the menu that appears
12. Under SMTP Server, ensure the Authentication allowed is CHECKED, then click on OK

Note: To add additional accounts, repeat 2-12.